Contact Us
Model | FSD-160 | FSD-200 | FSD-260 | FSD-300 | FSD-350 | FSD-400 | FSD-500 | FSD-600 |
---|---|---|---|---|---|---|---|---|
Capacity(Tons) | 160 | 200 | 260 | 300 | 350 | 400 | 500 | 600 |
Length of stroke(mm) | 200 | 200 | 250 | 250 | 300 | 300 | 350 | 350 |
Stroke per minute(S.P.M) | 30 | 30 | 24 | 24 | 24 | 24 | 20 | 20 |
Rated tonnage point(B.D.C)(mm) | 6 | 8 | 10 | 10 | 13 | 13 | 13 | 13 |
Die height(D.H)(mm) | 400 | 400 | 450 | 450 | 550 | 550 | 700 | 800 |
Adjustment of slide(mm) | 125 | 125 | 125 | 125 | 150 | 150 | 175 | 200 |
Area of slide(mm) | 1500X1000 | 1600X1000 | 1850X1000 | 1850X1200 | 2000X1200 | 2200X1300 | 2400X1300 | 2400X1300 |
Area of bolster(mm) | 1600x1200 | 1850x1200 | 2000x1200 | 2000x1400 | 2200x1400 | 2400x1450 | 2600x1450 | 2600x1450 |
1. Straight side press, rigid-frame design, with extra wide and long 8-point slide rail to ensure the accuracy.
2. Suitable for long stroke in blanking, forming and drawing processing.
3. Multi-function control system allows for optional integration with various automatic devices for increasing output.
1. Hydraulic overload protector.
2. Force-cycle lubrication system.
3. Slide & die balancer.
4. Electrical slide adjustment device.
6. Crank angle indicator.
7. Power take off shaft.
1. Inverter/Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch
6. Quick die change system. (Q.D.C.)
7. Load monitor.
8. Robot of automatism.
9. Automatic transfer device.
10. Flywheel brake device.
11. Micro inching device.
Model | FSS-160 | FSS-200 | FSS-260 | FSS-300 | FSS-350 | FSS-400 | FSS-500 | FSS-600 |
---|---|---|---|---|---|---|---|---|
Capacity(Tons) | 160 | 200 | 260 | 300 | 350 | 400 | 500 | 600 |
Length of stroke(mm) | 200 | 200 | 250 | 300 | 300 | 300 | 350 | 350 |
Stroke per minute(Fixed speed)(S.P.M) | 35 | 30 | 30 | 25 | 25 | 25 | 20 | 20 |
Stroke per minute(variable speed)(S.P.M) | 25-40 | 20-35 | 20-35 | 20-30 | 20-30 | 20-30 | 15-25 | 15-25 |
Rated tonnage point(B.D.C)(mm) | 6 | 8 | 8 | 10 | 12 | 12 | 13 | 13 |
Die height(D.H)(mm) | 400 | 400 | 450 | 450 | 450 | 450 | 600 | 700 |
Adjustment of slide(mm) | 80 | 100 | 100 | 100 | 100 | 120 | 120 | |
Area of slide(mm) | 710x750 | 710x750 | 900X1000 | 900X1000 | 1200X1200 | 1200X1200 | 1400X1400 | 1400X1500 |
Adjustment of bolster(mm) | 900X800 | 900X800 | 1100X1000 | 1100X1000 | 1300X1300 | 1300X1300 | 1500X1500 | 1600X1500 |
1. Straight side press, rigid-frame design, with extra wide and long 8-point slide rail to ensure the accuracy.
2. Suitable for long stroke in blanking, forming and drawing processing.
3. Multi-function control system allows for optional integration with various automatic devices for increasing output.
1. Hydraulic overload protector.
2. Force-cycle lubrication system.
3. Slide & die balancer.
4. Electrical slide adjustment device.
6. Crank angle indicator.
7. Power take off shaft.
1. Inverter/Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch
6. Quick die change system. (Q.D.C.)
7. Load monitor.
8. Robot of automatism.
9. Automatic transfer device.
10. Flywheel brake device.
11. Micro inching device.
Model | FSG-160(S) | FSG-160(H) | FSG-200(S) | FSG-200(H) | FSG-250(S) | FSG-250(H) | FSG-300(S) | FSG-300(H) | FSG-350(S) | FSG-350(H) | FSG-400(S) | FSG-400(H) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity(Tons) | 160 | 160 | 200 | 200 | 250 | 250 | 300 | 300 | 350 | 350 | 400 | 400 |
Length of stroke(mm) | 200 | 130 | 250 | 150 | 250 | 170 | 300 | 170 | 300 | 200 | 300 | 200 |
Stroke per minute(S.P.M) | 30-50 | 40-85 | 25-45 | 35-70 | 20-40 | 30-60 | 20-35 | 30-50 | 18-35 | 25-45 | 15-30 | 20-40 |
Rated tonnage point(B.D.C)(mm) | 6 | 3 | 7 | 3 | 7 | 3 | 7 | 3 | 7 | 3 | 8 | 4 |
Die height(D.H)(mm) | 450 | 400 | 500 | 450 | 550 | 450 | 550 | 450 | 550 | 500 | 600 | 550 |
Adjustment of slide(mm) | 100 | 100 | 120 | 120 | 120 | 120 | 120 | 120 | 150 | 150 | 150 | 150 |
Area of slide(mm) | 1730X670 | 1730X670 | 1950X750 | 1950X750 | 2200X900 | 2200X900 | 2250X900 | 2250X900 | 2400X1000 | 2400X1000 | 2500X1100 | 2500X1100 |
Adjustment of bolster(mm) | 1800x840 | 1800x840 | 2200x940 | 2200x940 | 2500x1000 | 2500x1000 | 2500x1000 | 2500x1000 | 2700x1200 | 2700x1200 | 2800x1400 | 2800x1400 |
1. Straight side frame design with 8-point slide rail to eliminate the open back issue and minimize the frame deflection, suitable for the processing of progressive dies.
2. Using low-noise and eco-friendly wet clutch and brake system.
3. High-efficient control system is operator friendly and better operation safety.
1. Wet clutch & brake.
2. Hydraulic overload protector.
3. Electrical grease lubrication system.
4. Slide & die balancer.
5. Electrical slide adjustment device.
7. Crank angle indicator.
8. Preset counter.
10. Maintenance tool.
1. Inverter / Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch.
6. Power take off shaft.
7. Quick die change system. (Q.D.C.)
8. Load monitor.
9. Robot of automatism.
10. Automatic transfer device.
11. Flywheel brake device.
Model | FOB-110 | FOB-160 | FOB-200 | FOB-250 | FOB-300 |
---|---|---|---|---|---|
Capacity(Tons) | 110 | 160 | 200 | 250 | 300 |
Length of stroke(mm) | 150 | 200 | 250 | 250 | 300 |
Stroke per minute(Fixed speed)(S.P.M) | 45 | 40 | 35 | 30 | 25 |
Stroke per minute(Variable speed)(S.P.M) | 35-60 | 30-50 | 25-45 | 20-40 | 20-35 |
Rated tonnage point(B.D.C)(mm) | 5 | 6 | 7 | 7 | 7 |
Die height(D.H)(mm) | 400 | 450 | 500 | 550 | 550 |
Adjustment of slide(mm) | 100 | 100 | 120 | 120 | 120 |
Area of slide(mm) | 1500X500 | 1630X580 | 1850X650 | 2000X800 | 2000X800 |
Adjustment of bolster(mm) | 1920x660 | 2100x760 | 2450x850 | 2700x900 | 2800x950 |
Super sturdy rigid-frame design with long slide guide, movement is more stable and accurate.
Using low-noise and environment-friendly wet clutch and brake system.
Larger bolster area, optional for integration with various automatic devices and progressive dies.
1. Wet clutch & brake.
2. Hydraulic overload protector.
3. Electrical grease lubrication system.
4. Slide & die balancer.
5. Electrical slide adjustment device.
7. Crank angle indicator.
8. Preset counter.
10. Maintenance tool.
1. Inverter / Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch.
6. Power take off shaft.
7. Quick die change system. (Q.D.C.)
8. Load monitor.
9. Robot of automatism.
10. Automatic transfer device.
Model | FSB-110 | FSB-160 | FSB-200 | FSB-250 | FSB-300 |
---|---|---|---|---|---|
Capacity(Tons) | 110 | 160 | 200 | 250 | 300 |
Length of stroke(mm) | 150 | 200 | 250 | 250 | 300 |
Stroke per minute(Fixed speed)(S.P.M) | 45 | 40 | 35 | 30 | 25 |
Stroke per minute(Variable speed)(S.P.M) | 35-60 | 30-50 | 25-45 | 20-40 | 20-35 |
Rated tonnage point(B.D.C)(mm) | 5 | 6 | 7 | 7 | 7 |
Die height(D.H)(mm) | 400 | 450 | 500 | 550 | 550 |
Adjustment of slide(mm) | 100 | 100 | 120 | 120 | 120 |
Area of slide(mm) | 1500X500 | 1630X580 | 1850X650 | 2000X800 | 2000X800 |
Adjustment of bolster(mm) | 1700x660 | 1800x760 | 22000x850 | 2500x900 | 2500x950 |
Super sturdy rigid-frame design with long slide guide, movement is more stable and accurate without the open back issue.
Using low-noise and eco-friendly wet clutch and brake system.
Larger bolster area, optional for integration with various automatic devices and progressive dies.
1. Wet clutch & brake.
2. Hydraulic overload protector.
3. Electrical grease lubrication system.
4. Slide & die balancer.
5. Electrical slide adjustment device.
7. Crank angle indicator.
8. Preset counter.
10. Maintenance tool.
1. Inverter / Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch.
6. Power take off shaft.
7. Quick die change system. (Q.D.C.)
8. Load monitor.
9. Robot of automatism.
10. Automatic transfer device.
Model | FSN-110(S) | FSN-110(H) | FSN-160(S) | FSN-160(H) | FSN-200(S) | FSN-200(H) | FSN-260(S) | FSN-260(H) |
---|---|---|---|---|---|---|---|---|
Capacity(Tons) | 110 | 110 | 160 | 160 | 200 | 200 | 260 | 260 |
Length of stroke(mm) | 170 | 100 | 200 | 130 | 200 | 150 | 250 | 200 |
Stroke per minute(Fixed speed)(S.P.M) | 50 | 70 | 40 | 60 | 35 | 50 | 30 | 45 |
Stroke per minute(Variable speed)(S.P.M) | 50-65 | 50-75 | 40-55 | 40-65 | 30-45 | 35-65 | 30-40 | 30-50 |
Rated tonnage point(B.D.C)(mm) | 4 | 3.2 | 6 | 4 | 6 | 4 | 7 | 4 |
Die height(D.H)(mm) | 350 | 385 | 400 | 435 | 450 | 475 | 450 | 475 |
Adjustment of slide(mm) | 90 | 90 | 100 | 100 | 125 | 125 | 125 | 125 |
Area of slide(mm) | 650X450 | 650X450 | 700X500 | 700X500 | 850X650 | 850X650 | 920X700 | 920X700 |
Adjustment of bolster(mm) | 870x600 | 870x600 | 1000x750 | 1000x750 | 1150x840 | 1150x840 | 1200x860 | 1200x860 |
Super sturdy rigid-frame design with long slide guide, movement is more stable and accurate without the open back issue.
Using low-noise and eco-friendly wet clutch and brake system.
Larger bolster area, optional for integration with various automatic devices and progressive dies.
1. Wet clutch & brake.
2. Hydraulic overload protector.
3. Electrical grease lubrication system.
4. Slide & die balancer.
5. Electrical slide adjustment device.
7. Crank angle indicator.
8. Preset counter.
10. Maintenance tool.
1. Inverter / Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch.
6. Power take off shaft.
7. Quick die change system. (Q.D.C.)
8. Load monitor.
9. Robot of automatism.
10. Automatic transfer device.
Model | FGN-25(S) | FGN-25(H) | FGN-45(S) | FGN-45(H) | FGN-60(S) | FGN-60(H) | FGN-80(S) | FGN-80(H) | FGN-110(S) | FGN-110(H) | FGN-160(S) | FGN-160(H) | FGN-200(S) | FGN-200(H) | FGN-260(S) | FGN-260(H) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity(Tons) | 25 | 25 | 45 | 45 | 60 | 60 | 80 | 80 | 110 | 110 | 160 | 160 | 200 | 200 | 260 | 260 |
Length of stroke(mm) | 75 | 50 | 90 | 60 | 120 | 80 | 150 | 100 | 170 | 100 | 200 | 130 | 200 | 150 | 250 | 200 |
Stroke per minute(Fixed speed)(S.P.M) | 100 | 120 | 80 | 100 | 70 | 90 | 60 | 80 | 50 | 70 | 40 | 60 | 35 | 50 | 30 | 45 |
Stroke per minute(Variable speed)(S.P.M) | 100-110 | 100-140 | 80-95 | 80-110 | 70-85 | 70-110 | 60-75 | 60-90 | 50-65 | 50-75 | 40-55 | 40-65 | 30-45 | 35-65 | 30-40 | 30-50 |
Rated tonnage point(B.D.C)(mm) | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 7 | 7 |
Die height(D.H)(mm) | 230 | 240 | 280 | 295 | 300 | 320 | 330 | 355 | 350 | 380 | 400 | 435 | 450 | 475 | 450 | 475 |
Adjustment of slide(mm) | 60 | 60 | 60 | 60 | 70 | 70 | 80 | 80 | 90 | 90 | 100 | 100 | 125 | 125 | 125 | 125 |
Area of slide(mm) | 350X250 | 350X250 | 400X300 | 400X300 | 480X350 | 480X350 | 530X400 | 530X400 | 650X450 | 650X450 | 700X500 | 700X500 | 850X650 | 850X650 | 920X700 | 920X700 |
Area of bolster(mm) | 700x360 | 700x360 | 800x440 | 800x440 | 870x500 | 870x500 | 970x500 | 970x500 | 1160x600 | 1160x600 | 1350x750 | 1350x750 | 1400x840 | 1400x840 | 1500x860 | 1500x860 |
Super hardiness and sturdy frame structure to minimize the frame deflection, ensure accuracy and prolong the life cycle of the dies.
Excellent performance, equipped with overload protection system to ensure the machine's life cycle and accuracy.
Optional for integration with automatic feeder devices to increase productivity and to ensure quality and stability.
1. Wet clutch & brake/Combined clutch.
2. Hydraulic overload protector.
3. Electrical grease lubrication system.(FGN-80~FGN-260)
4. Slide & die balancer.
5. Electrical slide adjustment device.(FGN-80~FGN-260)
7. Crank angle indicator.
8. Preset counter.
10. Maintenance tool.
1. Inverter / Variable speed motor.
2. Photoelectric safety device.
3. Pneumatic die cushion.
4. Slide knockout device.
5. Foot pedal switch.
6. Power take off shaft.
7. Quick die change system. (Q.D.C.)
8. Load monitor.
9. Robot of automatism.
10. Automatic transfer device.
Model | FDH-30 | FDH-60 | FDH-100 | FDH-160 |
---|---|---|---|---|
Capacity(Tons) | 30 | 60 | 100 | 160 |
Length of stroke(mm) | 30 | 30 | 30 | 75 |
Stroke per minute(S.P.M) | 200-900 | 120-700 | 120-500 | 120-400 |
Die height(D.H)(mm) | 240 | 300 | 360 | 360 |
Area of slide(mm) | 30 | 50 | 50 | 50 |
Area of bolster(mm) | 550x450 | 800x670 | 1000x995 | 1000x995 |
1. Unitized high quality casting frame structure especially suitable for precision electronic components and hardware workpieces.
2. Equipped with double die-set post guides to ensure the positioning accuracy by long high-speed working hours.
3. Compliance with CNS super grade accuracy criterion.
1. Hydraulic slide lock protect.
2. Die height indicator.
3. Reset type counter.
4. Front and behind of safety door control protect.
5. Crank angle indicator.
6. Independent type control panel.
7. Air ejector protect.
8. Dies of light.
9. Air motor of slide adjustment protect.
Quick die change system. (Q.D.C.)
Against vibration protect.
Dies of rated tonnage point check-out protect.
Dies of load monitor.
Coil material lubricating system.
Flywheel brake.
Feeder.
Model | FPD-15 | FPD-25 | FPD-40 | FPD-65 |
---|---|---|---|---|
Capacity(Tons) | 15 | 25 | 40 | 65 |
Length of stroke(mm) | 30 | 30 | 30 | 30 |
Stroke per minute(S.P.M) | 200-500 | 180-450 | 150-360 | 150-350 |
Rated tonnage point(B.D.C)(mm) | 1.5 | 1.5 | 1.5 | 1.5 |
Die height(D.H)(mm) | 180 | 230 | 270 | 330 |
Adjustment of slide(mm) | 35 | 40 | 50 | 50 |
Area of slide(mm) | 200X163 | 220X170 | 320X220 | 460X320 |
Area of bolster(mm) | 460x250 | 520x300 | 700x400 | 800x450 |
Long slide guidance designed slide block, equipped with air balancer system to ensure dynamic balance and accuracy, suitable for progressive dies.
Equipped with microcomputer control system, automatic stop angle positioning accuracy adjustment.
Compliance with CNS super grade accuracy criterion.
1. Automatic lubrication system.
2. Knockout device of slide.
3. Counter balance.
4. Crank angle indicator.
5. Handle slide adjusting device.
6. Power take off shaft.
7. Separate type electrical control panel.
8. Die height indicator. (65 tons optional)
9. Stuck on bottom release device.(65 tons optional)
10. Magnetic stroke counter.
11. Air ejector protect.
12. Maintenance tool.
1. Quick die change system. (Q.D.C.)
2. Against vibration protect.
3. Dies of rated tonnage point checkout protect.
4. Dies of light.
FINTEK Power Press machine series, which provide complete forming work solution, will always be your first choice.
Rigid construction and low deformation made high precision quality.
Application in Aerospace, Automotive, Medical, Industry and no matter what you can imagine about.